To make 2 Networks Per Per

In an age of growing computer science modernization, one of which is the science of computer networks.

Science simplest computer network is to create a network between two computers. How do I?

The steps in creating a network of two computers:

1. Setting up two computers together with the NIC (Network Interface Connection) in this case certainly hardware or network hardware, or so-called line cards.
2. Preparing the UTP cable and RJ 45 Header.
3. Of course, should be prepared ga nervous he he he
4. Turn on the computer and set the Network Connections through the control panel in the Start menu -> Settings.
5. Then double click the Icon LAN (Local Area Networking) click properties select the Internet Protocol [TCP / IP] and then select properties and select use the Following IP address. In the IP address 192.168.0.1 input numbers. In the Subnet mask 255.255.255.0 filled, then click the OK button.
6. Change Computer name and workgroup by right clicking my computer and choose properties. then the computer name click change button and then fill in name according to who you want, example: Comp 1 and do the same on workgroup.Catatan Workgroup must be the same between the computer 1 with computer 2, while a different computer name does not matter.
7. Perform steps 1 through 6 is on the second computer, but on the second computer an IP address set with address 192.168.0.2
8. Next step is to create a cable network for two computers. Then prepare a UTP cable in accordance with the long distance of 2 computers.
9. Install Header RJ 45 UTP cable set by the Cross
10. Then the pair UTP cable to each computer NIC.
11. Then do the checking by calling the IP address on the second computer or can also check through the Network Places on the windows explore.
12. When the network places already detected the second computer then on the second computer network has been successful.
13. Good luck
from : hilman arief wakanno